http://WWW.WATERHEATER.CO.IN
WARMSTREAM 5a796b67fa4635097c044442 False 39 8
OK
background image not found
Found results for
'agro waste'
Hot Water Generator INR   0 INR  0
-NaN%

Hot Water Generator

Warm Stream's "Aquaflowtherm" series LDO/HSD, FO or Gas Fired Hot Water Generators are fully automatic. They are an ideal source for supplying process heat through suitable hot water media upto a temperature range of 90oC. Hot water boilers are used where hot water is required in processes such as Steel Plants, Hotels, Hostels, Food processing, Textile industries, Rubber industries, etc. They offer 90% ± 2% efficiency (based on NCV) and are simple to operate. The capacity ranges from 50,000 Kcal/hr. to 25,00,000 Kcal/hr. Wood, Agro Waste and Coal fired models are also available for economy purpose We are leading manufacturers of Hot Water Generator in Anand, Gujarat, India,

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Storage Type Wooden Geyser INR   0 INR  0
-NaN%

Storage Type Wooden Geyser

Solid Fuel Fired Storage Wood Fired Water Heater It is said Luxury and Economy Seldom go together. But we made it possible, in our innovative storage Water Geyser. It brings warm refreshing water, wherever and whenever you want it. Volumetric capacity range is 35 to 2000 litres with 1 to 150 connections with possibility to serve between 5 to 1000 people. Salient Features : Improved Thermal Efficiency : Our long experience with wood burning combined with latest technology of heat transfer has resulted in this innovative, efficient Wooden Geyser. Insulated storage tank saves heat and takes only 10 to 15 minutes to warm up from cold start. Specifications : • Minimum Maintenance : It has no moving part and all surfaces/parts which are coming in contact with heat are protected by water wall construction. It is fabricated from heavy gauge quality steel having robust construction. Fuel : It works on inexpensive fuel like firewood, charcoal, agricultural, domestic and garden waste. It works as incinerator and solves waste disposal problems. • Safety : It uses no electricity. Hence, freedom from power cuts or electric shocks. All Geysers are individually hydraulic pressure tested. Installation : Our Geysers are generally installed in backyards or in the corners. It stays out and keeps your place clean. It does not require costly foundation. • Accessories : Our Geysers are supplied with ash cleaning rod cum fire wood feeding rod and fire grate, as the standard accessories. For commercial models (225Y & above) dial thermometer, smoke collector (Height: 220 MM) and Pressure Relief Tappings are provided. Features Type Wood, Coal, Briquets, Biomass, Coconut Shelves fired water heater Brand Name Warm Stream Certification ISO 9001:2015 Color Blue or any colour of customer choice Place of Origin V.U.Nagar, Gujarat Capacity 35 liters to 10,000 liters Power N.A Power Source It works on inexpensive fuel like firewood, charcoal, agricultural, domestic & garden waste Installation The water heaters are generally installed in the backyard or in a corner place of the house. Storage / Tankless Storage Additional Information Min. Order Quantity 1 Set(s) Payment Terms Other Delivery Time 1-2 working weeks Packaging Details Corrugated sheet or wooden crate depending upon the place. We are leading manufacturers of Storage Type Wooden Geyser in Anand, Gujarat, India.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Thermic Fluid Heaters INR   0 INR  0
-NaN%

Thermic Fluid Heaters

Flowtherm is a fully automatic, 3 pass, oil/gas fired packaged Thermic Fluid Heater capable of supplying process heat upto 300° C at near atmospheric pressure. As the same oil is re-circulated again between source and sink, its thermal efficiency is as high as 88%. Steam heating has many advantages and disadvantages, but the following disadvantages predominate over the advantages. When temperature required for steam is 150° C, the corresponding pressure required for steam heating becomes too high for economical design of process equipment. For example, at 300° C temperature, pressure requirements would be approximately 90 kgs./cm2, i.e. 1280 PSI. Such pressure requires costly equipment, boilers and pipings and other safety provisions including qualified boiler attendants. Steam heating is associated with the problem of corrosion and scaling. Corrosion eats away equipment and plants, while scaling reduces equipment life and erodes your profits by decreasing thermal efficiency. Maintenance and operation of water treatment plant is another headache. Thermic Fluid Heating System is adaptable to precise temperature control. Warm Stream’s FLOWTHERM is outside the purview of the Indian Boiler Regulation Act, hence NO statutory inspection is required, eliminating costly annual shutdowns and procedural delays. Automation : Flowtherm is a completely automatic unit where temperature and combustion are automatically controlled. The burner is ON-OFF or modulating type with automatic ignition and photoelectric flame failure sensing device to safeguard the combustion operation. All electric and electronic components and its circuits are housed in a special control panel cabinet mounted on Flowtherm. The electronic temperature controller cum indicator is fitted on Flowtherm which indicates, monitors and controls temperature of the system. A Differential Pressure Switch is provided to ensure a positive flow through the heating oil to safeguard the same against overheating the coil. If there is no circulation of thermic fluid, it will stop the combustion and hence protects the heating coil from overheating. Combustion Loop : In any heating system, where fuel is used for generating heat, what matters most is the combustion efficiency. Our Flowtherm is fitted with highly efficient, adjustable high pressure solid injection type burner, operating at 150 PSIG and above. It consists of self-cleaning on line oil filter, high pressure fuel pump, blower with adjustable damper, solenoid valve, vortex chamber, ignition electrodes and spray nozzle. The specially designed burner head provides high combustion efficiency by thoroughly mixing atomized fuel oil and air. The combustion air is pre-heated by waste heat available from boiler shell which ensures better combustion and higher thermal efficiency. Gas Loop : The combustion air supplied by the combustion blower, while passing through the annular passage formed between the intermediate and the inner shell recovers heat conducted and radiated form the inner shell and then heated air passes through the vortex generator, where it mixes with the atomized fuel oil spray. A mixture of oil mist and heated air is then ignited by a high voltage sparking system. Hot gases first descend through the inner coil, again descend between the inner and outer coil, again descend in the annular passage formed between the outer coil and the inner shell and it is finally exhausted to the atmosphere via chimney. Thermic Fluid System : It consists of heating coils made up of high temperature IBR approved carbon steel boiler tubes, dearator tank and expansion tank and insulated pipe grid which connects various user's equipment. The Thermic Fluid pump circulates thermic fluid through the coil, where it receives heat liberated from combustion. The heated oil passes through user equipment, where it gives away heat and returns to the thermic fluid heater via dearator tank, where the air and the vapour bubbles are removed. As the same oil is being recirculated again and again thermal efficiency of entire system is high. We are leading manufacturers of Thermic Fluid Heaters in Anand, Gujarat, India.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false