http://WWW.WATERHEATER.CO.IN
WARMSTREAM 5a796b67fa4635097c044442 False 39 8
OK
background image not found
Found results for
'process heat'
Hot Air Generator INR   0 INR  0
-NaN%

Hot Air Generator

Warm Stream's "VENTITHERM" direct and indirect type Hot Air Generators are fully automatic and run on on gas and oil. The ideal source of obtaining hot process air for Dryers, Ovens, Spray Dryers and other similar applications. Indirect fired have temperature limitation upto 400° C. Indirect fired Hot air generators do not have any refractory and all internal parts like combustion chambers, heat exchangers are highly reliable with low thermal inertia and have virtually no maintenance. They offer 83% ± 2% efficiency (based on NCV) and are simple to operate. The capacity ranges between 50,000 Kcal/hr. to 25,00,000 Kcal/hr. Direct Fired 'VENTITHERM', for the applications where contamination by carbon particles or combustion products do not matter for the product to be dried or baked, and higher temperature upto 100°. Indirect fired 'VENTITHERM', for the applications where clean hot air is required for the drying as in Food processing, Paint backing or for some fine chemicals. Wood and Coal fired models are also available for more economy.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Instant Gas Geyser INR   0 INR  0
-NaN%

Instant Gas Geyser

With liberalization of Indian economy and with improvement in efflyence in the society, consumer taste, style of living, daily need has undergone a sea change. Warm Stream responded by offering fully automatic instant Gas fired Water Geysers, by joining hands with Simex of Spain. Now Warm Stream is bringing to your door steps, the most modern, highly efficient, compact, safe and user friendly instant Gas Fired Water Geyser called “APARICI”. Salient Features : • ENERGY SAVER As no pilot flame is required, it saves upto 8% of gas consumption. • Easy to Install : No wires required. Just a 1.5 volts ordinary battery is needed. • ADJUSTABLE POWER With the flow regulator one can adjust hot water temperature and flow from 40% to 100%. • Versatile Range : The range of operating water pressure is between 7 to 150 PSI. • No Hassles : The entire operation is done with the help of Heat Exchanger with large diameter tube and interior ribbing. No coil is used. • Cost Effective : The combustion chamber is thermally insulated to prevent heat loss. • Smart & Elegant : It's not only smart but also sleek and elegant with an attractive powder coated finish. • Designed & Built : Using latest state of art technology in heat transfer and water heating, with only noble materials. No plastic parts inside. • Working Curve : The curve on the left explains the relation between water flow and output temperature depending on the position of gas control and flow selector. At 11 liter per Min (660 lit/hr.) flow, this heater can increase water temperature by 20 degrees C, but with 4 lit/min (240 lit/hr.) flow, this heater is capable of increasing water temperature by 72 degrees C. Turn the control knob and one can have plenty of hot water at the right temperature, wherever you want, whenever you want

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Hot Water Generator INR   0 INR  0
-NaN%

Hot Water Generator

Warm Stream's "Aquaflowtherm" series LDO/HSD, FO or Gas Fired Hot Water Generators are fully automatic. They are an ideal source for supplying process heat through suitable hot water media upto a temperature range of 90oC. Hot water boilers are used where hot water is required in processes such as Steel Plants, Hotels, Hostels, Food processing, Textile industries, Rubber industries, etc. They offer 90% ± 2% efficiency (based on NCV) and are simple to operate. The capacity ranges from 50,000 Kcal/hr. to 25,00,000 Kcal/hr. Wood, Agro Waste and Coal fired models are also available for economy purpose We are leading manufacturers of Hot Water Generator in Anand, Gujarat, India,

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Solar Water Heating System INR   0 INR  0
-NaN%

Solar Water Heating System

Industrialization brings with itself a bright future by way of innovative and efficient handling of both conventional and non - conventional products. Solar Energy is the key non-conventional source which when used effectively leads to better returns on investments. The continuity of solar energy is unaffected by power cuts or transmission losses. It is safe and requires no maintenance. Besides its absolutely pollution free.. Sun is the only source of energy available, without any sign of decline. Salient Features • Easy to Install • Durable Saves Energy • High Standards of quality • High operating efficiency • Accident Free Suitable for heating fluids up to 85oC • The most luxurious way of getting hot water Quick return on investment 100% depreciation for commercial use Advantage of Solar System : Solar Water Heating Systems, you will find, make great sense - both economically. Powered as they are by the Sun, Solar Water Heating Systems save you a significant Amount on your electricity bills, month after month. In fact, these savings over a Period of time, pay for the one time investment of the Solar Water Heating System. After which the hot water comes to you absolutely Free! You need have no worries about rising electricity tariffs unlike the owners of power - hungry geysers! Not only is Solar Energy free, it is forever ! Add to this the durability of a Solar Water Heating System from Warm Stream Solar and you have hassle - free hot water for years! Solar energy is clean, non-polluting energy. So while you enjoy a hot water bath, you can enjoy the warmth of knowing that you are doing your bit to help make a better and healthier place for future generations. How It Works? The Industrial / Commercial Solar Water Heating Systems are designed to supply water at 80oC. Sun rays pass through the transparent glass of the collector and strike on the black surface of the absorber. The black coating on the absorber converts We are leading manufacturers of Solar Water Heating System in Anand, Gujarat, India.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Storage Type Wooden Geyser INR   0 INR  0
-NaN%

Storage Type Wooden Geyser

Solid Fuel Fired Storage Wood Fired Water Heater It is said Luxury and Economy Seldom go together. But we made it possible, in our innovative storage Water Geyser. It brings warm refreshing water, wherever and whenever you want it. Volumetric capacity range is 35 to 2000 litres with 1 to 150 connections with possibility to serve between 5 to 1000 people. Salient Features : Improved Thermal Efficiency : Our long experience with wood burning combined with latest technology of heat transfer has resulted in this innovative, efficient Wooden Geyser. Insulated storage tank saves heat and takes only 10 to 15 minutes to warm up from cold start. Specifications : • Minimum Maintenance : It has no moving part and all surfaces/parts which are coming in contact with heat are protected by water wall construction. It is fabricated from heavy gauge quality steel having robust construction. Fuel : It works on inexpensive fuel like firewood, charcoal, agricultural, domestic and garden waste. It works as incinerator and solves waste disposal problems. • Safety : It uses no electricity. Hence, freedom from power cuts or electric shocks. All Geysers are individually hydraulic pressure tested. Installation : Our Geysers are generally installed in backyards or in the corners. It stays out and keeps your place clean. It does not require costly foundation. • Accessories : Our Geysers are supplied with ash cleaning rod cum fire wood feeding rod and fire grate, as the standard accessories. For commercial models (225Y & above) dial thermometer, smoke collector (Height: 220 MM) and Pressure Relief Tappings are provided. Features Type Wood, Coal, Briquets, Biomass, Coconut Shelves fired water heater Brand Name Warm Stream Certification ISO 9001:2015 Color Blue or any colour of customer choice Place of Origin V.U.Nagar, Gujarat Capacity 35 liters to 10,000 liters Power N.A Power Source It works on inexpensive fuel like firewood, charcoal, agricultural, domestic & garden waste Installation The water heaters are generally installed in the backyard or in a corner place of the house. Storage / Tankless Storage Additional Information Min. Order Quantity 1 Set(s) Payment Terms Other Delivery Time 1-2 working weeks Packaging Details Corrugated sheet or wooden crate depending upon the place. We are leading manufacturers of Storage Type Wooden Geyser in Anand, Gujarat, India.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Thermic Fluid Heaters INR   0 INR  0
-NaN%

Thermic Fluid Heaters

Flowtherm is a fully automatic, 3 pass, oil/gas fired packaged Thermic Fluid Heater capable of supplying process heat upto 300° C at near atmospheric pressure. As the same oil is re-circulated again between source and sink, its thermal efficiency is as high as 88%. Steam heating has many advantages and disadvantages, but the following disadvantages predominate over the advantages. When temperature required for steam is 150° C, the corresponding pressure required for steam heating becomes too high for economical design of process equipment. For example, at 300° C temperature, pressure requirements would be approximately 90 kgs./cm2, i.e. 1280 PSI. Such pressure requires costly equipment, boilers and pipings and other safety provisions including qualified boiler attendants. Steam heating is associated with the problem of corrosion and scaling. Corrosion eats away equipment and plants, while scaling reduces equipment life and erodes your profits by decreasing thermal efficiency. Maintenance and operation of water treatment plant is another headache. Thermic Fluid Heating System is adaptable to precise temperature control. Warm Stream’s FLOWTHERM is outside the purview of the Indian Boiler Regulation Act, hence NO statutory inspection is required, eliminating costly annual shutdowns and procedural delays. Automation : Flowtherm is a completely automatic unit where temperature and combustion are automatically controlled. The burner is ON-OFF or modulating type with automatic ignition and photoelectric flame failure sensing device to safeguard the combustion operation. All electric and electronic components and its circuits are housed in a special control panel cabinet mounted on Flowtherm. The electronic temperature controller cum indicator is fitted on Flowtherm which indicates, monitors and controls temperature of the system. A Differential Pressure Switch is provided to ensure a positive flow through the heating oil to safeguard the same against overheating the coil. If there is no circulation of thermic fluid, it will stop the combustion and hence protects the heating coil from overheating. Combustion Loop : In any heating system, where fuel is used for generating heat, what matters most is the combustion efficiency. Our Flowtherm is fitted with highly efficient, adjustable high pressure solid injection type burner, operating at 150 PSIG and above. It consists of self-cleaning on line oil filter, high pressure fuel pump, blower with adjustable damper, solenoid valve, vortex chamber, ignition electrodes and spray nozzle. The specially designed burner head provides high combustion efficiency by thoroughly mixing atomized fuel oil and air. The combustion air is pre-heated by waste heat available from boiler shell which ensures better combustion and higher thermal efficiency. Gas Loop : The combustion air supplied by the combustion blower, while passing through the annular passage formed between the intermediate and the inner shell recovers heat conducted and radiated form the inner shell and then heated air passes through the vortex generator, where it mixes with the atomized fuel oil spray. A mixture of oil mist and heated air is then ignited by a high voltage sparking system. Hot gases first descend through the inner coil, again descend between the inner and outer coil, again descend in the annular passage formed between the outer coil and the inner shell and it is finally exhausted to the atmosphere via chimney. Thermic Fluid System : It consists of heating coils made up of high temperature IBR approved carbon steel boiler tubes, dearator tank and expansion tank and insulated pipe grid which connects various user's equipment. The Thermic Fluid pump circulates thermic fluid through the coil, where it receives heat liberated from combustion. The heated oil passes through user equipment, where it gives away heat and returns to the thermic fluid heater via dearator tank, where the air and the vapour bubbles are removed. As the same oil is being recirculated again and again thermal efficiency of entire system is high. We are leading manufacturers of Thermic Fluid Heaters in Anand, Gujarat, India.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Storage Type Gas Fired Water Heater INR   0 INR  0
-NaN%

Storage Type Gas Fired Water Heater

Buyers can lay their hands on our impeccable lot of Storage Type Gas Fired Water Heater having seamless quality and cost-effective prices. Wholesale as well as retail consignments of the goods can be undertaken by us with ease. In addition, we promise to make as per schedule delivery. Salient Features : • Specially selected energy efficient thermal insulation significantly minimizing losses. Highly sensitive, quick-acting thermostat starts heating water quickly. The flue baffle maximizes heat absorption in the Flue Tube; by minimizing air movement in the heater. During standby periods it further reduces heat loss up the flue (Smoke) tube. • Fully automatic control shuts off the gas, once the pilot burner is extinguished either by operator or by accident. Pilot burner ignites main burner once water temperature falls below preset level and shuts it off, as soon as the desired temperature is reached. Relief against pressure buildup through inlet cold water to overhead tank, for 100% safety. • Built-in gas pressure regulator ensures uniform gas flow, under all conditions. Imported energy saving gas controls and cutoff mechanisms ensure absolute safety. Three convenient thermostat settings at your finger tips ( warm, Hot and very Hot ). Accordingly, you get water at the preset temperature throughout the 24 hrs. a day. • No need to fire or extinguish the burner. Simple robust construction using heavy gauge steel tanks for longer life. Hand-hole clean-out door makes internal cleaning very simple and easy. • The size of water connections provided ensures full-flow delivery to the fixture. Long-dip tube introduces cold water near bottom of the tank, increasing amount of hot water available for withdrawal at top. No need of any hazardous electrical controls. Features Brand Name: Warm Stream Certification: ISO 9001:2008 Color: Blue or any colour of customer choice Fuel: PNG and LPG gas Place of Origin: V.U.Nagar, Gujarat Usage: Industrial, Commercial as well as domestic heating needs Capacity: 50 Liters to 10,000 Liters Storage / Tankless: Storage Additional Information Min. Order Quantity: 1 Set(s) Payment Terms: Other Delivery Time: 2-3 working weeks Packaging Details: Corrugated sheet or wooden packing depending upon delivery place. We are leading manufacturers of Storage Type Gas Fired Water Heater in Anand, Gujarat, India.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false